Home | » Products | » Pre Engineered Building System | » Pre Engineered Metal Building |
We fabricate these building systems on the following parameters:
Building Length | Building length: Adequately parallel space between two walls and columns |
End bay length: Enough space from the exterior flange of end wall columns at the center line and the interior frame columns | |
Interior bay length: Space between the center lines of two adjoining interior frame columns | |
Desirably, bay space spans from 6m to 7.5 m (up-to 15 m) is also achievable | |
Building Height | Space from the bottom of the main frame post, lower boarder to the top boarder of the walls |
Proper space between final floor level and the top of structural member at the edge of a roof in case of recessed or elevated pillars from the finished floor | |
Height: Up to 30 m | |
Roof Slope (x/10) is the pitch of the roof with regard to the horizontal | |
Generally expected roof slopes are 1/10 and 12 | |
Design Load | Roof Live Loads: 0.75 kN/m2 Design for putting up with the loads of snow, seismic activity, collateral, or any other local weather and climatic condition |
Loads applied are in compliance with the American codes and standards befitting to pre-engineered structures unless requested by the clients | |
Design Wind Speed | As per IS: 875 for location |
![]() |
P M IMPEX PVT. LTD.
All Rights Reserved.
|